+998 97 771 11 83 Downloads For state customers
SVO 01 Prom 100W. Industrial suspended luminaires. Sila Sveta. Visualisation based on a photograph of the actual product: the background and lighting are AI-generated, the geometry and construction match the product
Visualisation based on a photograph of the actual product: the background and lighting are AI-generated, the geometry and construction match the product

SVO 01 Prom 100W

100 W, IP54, mounting height 4 to 30 m.

Power
100 W
Luminous flux
up to 18,000 lm
Ingress protection
IP54
Mounting height
4 to 30 m

811,440 UZS

Price includes 12% VAT. Price list dated 30 March 2026.

2018 photometry taken from the HLT model of the same name. A new report is in progress.

Where it is used

The workhorse of the series: factory floors, warehouses and hangars. Twice the power of Prom 50W, so the same area needs half the mounting points and half the cable. Higher ceiling or a stricter target? See Prom 150W and 200W.

Specification

Power 100 W
Luminous flux, calculated up to 18,000 lm 1
Luminous flux from the IES file 13,000 lm 1 see the curve
Luminous efficacy, calculated up to 180 lm/W 2
Ingress protection IP54
Colour temperatures 4000 / 5000 / 5700 / 6500 K
Beam angle 107° at half of peak intensity 6 see the curve
Mounting height 4 to 30 m
Ambient temperature -30 to +50 °C 3
Rated life 50,000 h (L90), calculated 4
Warranty 3 years
Housing Extruded aluminium profile
SKU svo-01-prom-100
Colour rendering index Ra Details are being confirmed 5
Percent flicker Details are being confirmed 5
Unified glare rating UGR Details are being confirmed 5
Supply voltage range Details are being confirmed 5
Dimensions Details are being confirmed 5
LEDs and driver Details are being confirmed 5

Notes

  1. The calculated flux is power × 180 lm/W: an upper bound from the efficacy claimed for the LED modules; the module specification and the report are not published on this site. It is not a measurement of the assembled luminaire: the 2018 IES files give 130 to 140 lm/W. The LM-79 report is in progress; until then, use the flux from the IES file in your design, not the calculated one. The flux from the IES file is the value held in the attached 2018 photometric file. It is a different figure, not a refinement of the calculated one: the two converge only after LM-79.
  2. Calculated from the efficacy claimed for the modules, not a measurement of the assembled luminaire. The 2018 IES files give 130 to 140 lm/W for the models that have a file.
  3. Range from the 2018 catalogue, being confirmed for the current drivers.
  4. Calculated life of the LED module from the LED vendor's data, not of the assembled luminaire. The LM-80 report and the TM-21 projection have been requested; until then the figure is not backed by a report.
  5. The rows at the end of the table are what the product data sheet does not carry yet: Ra, percent flicker, UGR, beam angle, supply voltage range, dimensions and the make of the LEDs and driver. Each will appear here as soon as a document confirms it. If you need one of them for technical specifications now, ask us by phone.
  6. The beam angle is computed from the attached IES file at half of the peak intensity. The multiplier does not change the shape of the curve, so the figure holds even for the two files whose absolute values do not agree.

Light distribution curve

Built from the same IES file offered for download. Load it into DIALux to verify.

90° 90°
Peak intensity
7,812 cd
Flux from the file
13,000 lm
Efficacy from the file
130 lm/W

The integral of the curve in the same file gives 14,398 lm, 11% more. A luminaire does not emit more than is put into it: the disagreement is inside the file, and an LM-79 report will show which of the two numbers is right.

C0-C180 C90-C270

The file is dated 2018 and comes from the HLT model of the same name. The calculated flux in the table above was obtained differently.

Model documents

  • SVO 01 Prom 100W, IES

    2018 photometry taken from the HLT model of the same name. A new report is in progress.

    IES, 3 KB

  • Product data sheets, PDF

    One data sheet per model, 11 files.

    In preparation

  • Declaration of conformity for the luminaires

    Mandatory for HS 9405 (Cabinet of Ministers Resolution No. 43, annex 4, item 107). Being reissued; the number and validity will be shown here.

    In preparation

  • Price list of 30 March 2026, PDF

    11 models across four series, unit prices.

    PDF, 347 KB

All downloads

Get a free calculation

Send your technical specifications or floor plan: an engineer works out the illuminance in DIALux, the number of luminaires and the payback period.